Regular price
£269.99 GBP
Sale price
£269.99 GBP
Regular price
£360.00 GBP

Free UK Mainland* Delivery on Orders over £75

Hassle Free Returns

Order Before 2pm for Next Day Delivery


This PV Logic FLEXi Roof & Decktop Kit contains everything you need to install the lightweight and semi flexible solar panel onto the deck of your boat or roof of your campervan, caravan or motorhome or boat roof/deck.

  • Panel
  • Controller
  • Bonding agent
  • Waterproof gland

  • From the 10wp to the 80wp, PV Logic Flexi is well suited for use where a super robust, low profile and lightweight panel is needed, or the substrate to which the panel will be fixed has a slight curve. Ideal for marine buoys, boat decks, campervans etc.

    Flexi Advantages

    Self-healing top surface

    The ETFE top layer gives the PV Logic Flexi extra resilience in really tough conditions. ETFE has a memory effect or self-healing capacity in the event the panel comes into contact with branches etc, thus ensuring any slight abrasions are ‘healed’ within a few hours. The Flexi range can even be walked on with soft deck shoes! During production the ETFE is dimpled to further protect the panel and provide an anti-slip surface, particularly useful if the panel is fitted to a boat deck.

    Completely waterproof

    Each panel is assembled to ensure complete encapsulation. This ensures the 6 layer heavy duty laminate protects the solar cell circuit from extreme conditions. The junction box is also injected with special silicon, guaranteeing no water ingress.

    Cells protected from hot spots

    Where used on a campervan or boat, partial shading of a solar panel is typical. In these circumstances, heat build-up and damaging hot spots can occur leading to a significantly reduced life cycle of the panel. The larger 60w and 80w PV Logic Flexi panels have up to two shading diodes housed within the fully waterproof junction box to prevent this occurrence.

    Superior design

    There are no square edges on a PV Logic Flexi! Rounded panel corners and a unique curved junction box provide superior adhesion, no snag lamination and no sharp edges. The junction box is mechanically fixed in addition to being bonded to the panel. Strain relief is provided for the fitted 4m UV stabilised PV cable ensuring it cannot be accidentally pulled from the junction box.

    Easy fix

    The Flexi range can be bonded to flat or slight curved surfaces (3cm curve per metre) such as painted aluminium, metal, GRP and fibreglass using Simson ISR 70-03. The aluminium layer is also pre-drilled with 4.5mm holes should the panel need to be mechanically fixed as well as or instead of bonding.


    The Flexi range is setting new standards with a 5 year product and a 20 year performance warranty*.

    Kit Includes

  • 1 x STPVF080 – 80wp solar panel (rear cable exit)
  • 1 x 4m Cable (attached)
  • 1 x 10A Charge Control
  • 1 x Fuse
  • 6 x Ring Terminals
  • 1 x Tube Bonding Adhesive
  • 1 x Cable gland
  • 10 x Stainless steel fixing screws
  • 1 x Instruction Sheet

  • Panel Specification

  • Power (Wp): 80watts
  • Nominal Voltage (Vmp): 18V DC
  • Nominal Current (Imp): 4.45A
  • Open Circuit Voltage (Voc): 21.6V
  • Short Circuit Current (Isc): 4.82A
  • Operating Temperature: -40 to + 80 Deg C
  • Max System Voltage: 750V DC
  • Dimensions: 885mm x 665mm x 3mm (Junction box at rear)
  • Weight: 4.5kg
  • Approx. watt-hours/day**: 480W
  • Approx. amp-hours/day** : 26.7A
  • ** Based on 6 hours of average daily peak sunlight hours.

    **Cell performance warranty states that at 20 years the cell output will be no less than 80% of new performance values – i.e the cell degradation rate will be no greater than 20% in 20 years.

    Product Added To Cart

    Just Landed For 2023

    From essential everyday items to accessories and gadgets… shop the products our customers love!

    Join Newsletter Image

    Join our Free Newsletter

    Get our Exclusive Discounts & New Product Releases direct to your inbox.